cutting list & lead times

What we make

Every figure below is a starting “from” guide in Australian dollars so you can gauge fit before we measure. Written quotes follow a site visit or plan review.

The cutting list

Lead times run along a 0–20 week folding-rule scale from signed drawing to delivery or install. We'll reply within two working days to talk it through. Every figure on this site is a "from" guide; no quote, price or start date is confirmed until we've measured and sent it in writing.

01

Dining tables

Long-grain tables in Tasmanian blackwood, oak or myrtle, with breadboard ends or mortised trestle bases built for daily family use.

  • Timber selection together at the workshop rack
  • 1:10 elevation drawing and sample oil board
  • Hand-planed top with three coats of hardwax oil
  • Delivery and room placement across Greater Hobart and the Huon Valley

Guide price

from $4,800

per piece

Typical lead time

8–10 weeks

Booking now
02

Sideboards and cabinets

Bookmatched doors, piston-fit dovetailed drawers and sliding panels made to hold records, tableware or linen without sagging.

  • Custom internal dividers, shelves and cable routing
  • Through- or half-blind dovetailed drawer boxes
  • Solid brass hardware and soft-close or traditional timber runners
  • Delivery and levelling in your room

Guide price

from $3,600

per piece

Typical lead time

8–12 weeks

Booking now
03

Bookwalls, window seats and built-ins

Floor-to-ceiling libraries, bay window benches and hallway storage scribed tight to crooked plaster and old floorboards.

  • On-site laser and story-stick measure
  • Full workshop dry-fit before finishing
  • On-site scribing, installation and trim
  • Optional solid-brass ladder rail or lift-up bench storage

Guide price

from $1,900

per linear metre

Typical lead time

6–10 weeks

Booking now
04

Kitchens and islands

Full timber kitchens and standalone farmhouse islands built in solid hardwood frames with durable birch-ply carcasses and oiled benchtops.

  • Site measure and coordination with your plumber, sparky or architect
  • Full joinery drawings and fixed written quote before we cut
  • Solid timber doors, dovetailed pantry drawers and island joinery
  • On-site installation and final oil coat once trades clear

Guide price

from $28,000

per kitchen

Typical lead time

14–18 weeks

Waitlist

Booking site measures for March

05

Hardwood decks and steps

Well-drained subframes, hidden stainless fixings and crisp mitred stairs in dense Australian hardwoods that handle coastal weather.

  • Site level check and subframe engineering coordination if required
  • Seasoned spotted gum or silvertop ash boards
  • Hidden deck clips or countersunk stainless screws with neat gaps
  • First two coats of penetrating decking oil on all four faces

Suitable timbers

Guide price

from $640

per m²

Typical lead time

4–6 weeks

Booking now
06

Repairs and restoration

Re-gluing loose chairs, tightening split tabletops and stripping tired varnish back to an honest oiled surface.

  • Bench inspection and honest advice on whether a piece is worth saving
  • Hide-glue or structural timber repairs matched to the original species
  • Hand scraping and fresh oil finish

Suitable timbers

Matched to the piece

Guide price

from $480

per piece

Typical lead time

2–4 weeks

Paused

Back in the new year

From first note to final coat

Five clear steps so you always know what happens next and what it will cost before we cut a single board.

  1. Step 1

    Enquiry

    Send your rough sizes, suburb, preferred timber and timing via our Contact page or email. We’ll reply within two working days with honest guide numbers and next steps.

  2. Step 2

    Site measure

    For kitchens, built-ins and decks we visit on site across Greater Hobart, Kingston, the Eastern Shore and the Huon Valley. For freestanding furniture we can meet at the workshop rack.

  3. Step 3

    Drawings and fixed quote

    We prepare 1:10 shop elevations, confirm hardware and timber selection, and send a written fixed quote along with a provisional bench start week.

  4. Step 4

    Build in the workshop

    We mill, joint, dry-fit and oil your piece at our Hobart bench, sending progress photos or inviting you in to see the boards laid out before glue-up.

  5. Step 5

    Fit and finish

    We deliver furniture ourselves and install kitchens, bookwalls and hardwood decks on site, leaving you with a care card and a small tin of maintenance oil.

What shapes the price

Two dining tables of the same length can sit thousands apart depending on the boards and joints. Here is what moves a written quote up or down.

01

Timber choice

Regrowth Tasmanian oak and spotted gum sit at the accessible end; wide fiddleback blackwood, blackheart sassafras and salvaged Huon pine carry higher board costs.

02

Size and span

Long single-length tabletops, tall bookwalls and wide elevated decks need thicker stock and deeper structural framing.

03

Joinery detail

Hand-cut through dovetails, breadboard ends, inset beaded doors and custom brass hardware take more bench hours than simpler square-edged builds.

04

Finish and coats

Hand-rubbed hardwax oil, multi-coat kitchen benchtop sealing and four-sided exterior decking oil are matched to how hard the surface works.

05

Site access and fitting

Tight Battery Point stairs, uneven heritage walls requiring extra scribing, or steep hillside deck footings add on-site fitting time.

before you write

Common questions

Straight answers on quotes, site measures, timber care and working alongside your architect or builder.

How do deposits and payments work?
Nothing is paid through this website. Once you approve the drawings and written fixed quote, we agree the deposit and milestone schedule in writing — typically a timber deposit to reserve your bench slot and buy the pack from the mill, with the balance on delivery or practical completion.
How do you handle site measures?
We do site measures across Greater Hobart, Kingston, the Eastern Shore and the Huon Valley once our initial “from” guide feels in the right ballpark for you. We measure walls, floor fall and stair access ourselves so the joinery scribes cleanly on installation day.
How do I care for an oiled timber finish?
Wipe spills with a damp cloth rather than harsh spray cleaners, and avoid leaving wet glass rings overnight. Every 18–24 months a quick wipe-on maintenance oil refreshes the surface in ten minutes without needing to sand back to bare wood.
Can you build from reclaimed or my own timber?
Yes, provided the boards are properly air- or kiln-dried (around 10–12% moisture content for Hobart interiors) and free of hidden metal. Bring a sample board or send photos when we reply and we’ll let you know if it is workable.
Do you work from architects' or designers' drawings?
Often. Mention that you have architectural plans in your enquiry and we’ll reply with where to send the PDFs. We translate concept drawings into full joinery shop drawings and coordinate directly with your builder.

ready to talk sizes?

Start with a short commission enquiry

No obligation and no automated quotes — just a direct reply from the workshop within two working days.

Start a commission enquiry